Road Safety Blog

Driving in the wet? Watch out for aquaplaning!

PORT ELIZABETH, South Africa, – With many regions of South Africa currently experiencing heavy rains after a prolonged drought, motorists face increased danger in the wet and slippery conditions.

Aquaplaning, where the tyres lose contact with the road surface, and the driver is no longer in control of the vehicle, is undoubtedly one of the most daunting scenarios facing drivers in these conditions.

Tyres can disperse up to 30 litres of water a second at 80 km/h, but with only 1.6 mm tread depth remaining, water displacement drops to just over 50 percent of that level. Currently, the minimum legal tread depth in South Africa is just 1 mm, which dramatically increases the risk of a total loss of control.

Continental has an unwavering focus on maximising driving safety, producing cutting-edge tyres that set new standards for grip and braking distances – particularly in the wet. Through its Vision Zero initiative, Continental is striving towards reducing and ultimately eliminating traffic collisions and fatalities.

Measurements conducted by Continental have shown that tyres with a residual tread depth of 3mm still retain just over 80 percent of their water displacement capability. To determine this, the tyre manufacturer ran a variety of tests with different tyres.

The tests showed that as tread depth decreases, all models of tyre lose the ability to disperse larger volumes of water. Accordingly, when tyres reach the 3mm limit, drivers should consider replacing them.

To help determine the residual tread depth, Continental includes “wet indicators” between the tread grooves. Protruding 3mm, these indicator ribs are located between the tread blocks.

If the surrounding tread has worn to the level of the indicators, it is time to replace the tyres in the interests of the safety of all road users. The wet indicators can be found aligned with the raindrop symbol on the sidewall of the tyres.

With new and run-in tyres, drivers always need to slow down in the wet to avoid the risk of aquaplaning. If aquaplaning should nevertheless occur, drivers should take their foot off the accelerator immediately and depress the clutch in the case of a manual gearbox.

Avoid moving the steering wheel or braking, although if an accident threatens, emergency braking should be initiated at once – in most cases, the rear wheels may still have enough grip to slow the vehicle. As soon as the tyres are back in contact with the road, drive on at reduced speed.

Also view:

Wet Weather Conditions and Safe, Defensive Driving

What is Aquaplaning and what should Drivers do to prevent Crashes caused during Aquaplaning?

Exit mobile version